- Recent questions in PreSonus Hub / Plugins

How can I access Ampire after it has been activated

Sun, 16 Jun 2024 00:32:17 +0000

I have the Presonus Audiobox USB studio that includes Audio =box USB Studio and installed my purchased items Ampire, Ampire High density pack Fat Channel Collection Vol, 1, Fat channel XT Analog effects collection. I have spent an entire day trying to acces the most features. Simply to access and open Ampire. I have the Hub, used to install and activate all the items. I have the Studio One 6 as the main recording software to record. It all seems great, except I cannot work even the open basic feature.

I do not think the installation was done incorrectly. I am a systems engineer and have been in the industry for about 30 years. I cannot imagine a user friendly setup as this should be causing this much work to open something to test.

Are PreSonus HD7 Headphones Good for Mixing?

Tue, 11 Jun 2024 14:10:18 +0000

I'm thinking of getting the PreSonus HD7 headphones for my home studio. I've seen mixed reviews about their performance. How do they hold up for professional mixing, especially in terms of sound accuracy and detail? Are the bass and highs reliable enough for critical listening?

Any advice or alternative recommendations?

Main toolbar is missing?

Tue, 23 Apr 2024 02:37:48 +0000

My main toolbar, with all the cut/select tools, just disapeared one day. The bar where the tools are displayed is empty, except for the smart tool. I tried reseting the program to it's default presets, and also updating it, but neither of those worked. Does anyone know what causes this problem or what I can do to fix it? This is in Studio One 6

https://64.media.tumblr.com/ec52f661fe16269b58c8d0b275ed89c9/55a1c53cd1052716-51/s640x960/96b4a53d7bde483d36ea6b6e03ea3d893bcda2c9.pnj

Random buzz with Studio 68c

Fri, 19 Apr 2024 15:04:27 +0000

I've recently been getting quick, random "buzz" sounds from my 68c, lasting about .5 seconds. I can hear them on my monitoring headphones and they show up in my recordings (Logic Pro). There might be 2 or 3 buzzes in succession, or they might come in longer intervals, like 30 seconds or more, but always just a quick buzzing sound. I haven't had this problem previously.

I've been using my Studio 68c for occasional podcasts and educational audio content for a couple years. Here's my setup. For mics, I'm using both an EV RE20 and a Shure SM7b, Fetheds with 48v phantom power, running into the 68c and then into my 2023 MacBook Pro (M2). There shouldn't be any random power draws on the circuit that I can think of. The electrical outlet is only shared with my MacBook's power brick.

I'm wondering if the AC power adapter for the 68c might be bad? The AC end of the power adapter never did plug fully into the little box that connects to the 68c. That part always seemed like a wonky part of the unit.

Any and all suggestions are welcome!

How to set up Dubler 2 Mike to use with Presonus 68c

Mon, 04 Mar 2024 17:03:43 +0000

Hi

I have the Presonus 68c interface which is amazing!!!

However I purchased the Dubler 2 set, I loaded the software and the mic with the Dubler kit has a USB plug in, so I installed it in my laptop as there is no usb to connect it to my Presonus interface.

The mic is recognised and I followed instruction to correctly install, all went well but is says in Dubler window “no midi connection found.

So the mic responds to my voice and is recognised in Studio one new song window, but I need to know best way to set it up how can I get Dubler to use the Presonus for midi ??

I watched a few videos but need some reassuring in how I am setting up the Dubler mic and loaded software

I am a novice so I hope you can help me

Many thanks

John

07733363534

I am running a ASU’s i9 laptop 32gb ram with windows 11.

thanks John

How to set up Dubler 2 Mike to use with Presonus 68c

Mon, 04 Mar 2024 17:03:01 +0000

How to set up Dubler 2 Mike to use with Presonus 68c

Mon, 04 Mar 2024 17:02:03 +0000

How to set up Dubler 2 Mike to use with Presonus 68c

Mon, 04 Mar 2024 17:01:21 +0000

How to set up Dubler 2 Mike to use with Presonus 68c

Mon, 04 Mar 2024 17:00:53 +0000

26c - Can Playback Stems 3 & 4 be routed to Main Output metering on front panel?

Mon, 05 Feb 2024 17:53:00 +0000

Hi all, I would like to ensure there is an active output signal on Playback Stems 3 & 4 (Line Outs 3 & 4) by a visual indicator on the Main meters - an audio one can be heard on the headphone output when pressing the A/B button; is this possible through the Universal Control app? Or can it be achieved at all?

What do you do if you can find the VST plugin folder, but nothing comes up in my DAW?

Tue, 16 Jan 2024 16:33:01 +0000

I followed the steps above but still can't load my amplitube 5 plugins through Studio One.

My quantum 2626 will not turn on. I tried everything I’ve seen on here so I’m assuming the power chord is faulty

Sat, 06 Jan 2024 22:23:18 +0000

No lights will show up. Unable to turn on my quantum 2626.

Air2 Shows up in loops???

Tue, 12 Dec 2023 21:20:31 +0000

Hi all,

My Air2 Reverb plug-in installed itself in the loops folder. I tried reinstalling from file with no luck in moving it. Also, even though it works when dragged to the track, the individual presets are not in any of the folders when expanded from the browser. Other stuff keeps moving or just goes missing from projects., too. Any idea why and if I end up deleting it, will it show up in Hub for a new download? The product doesn't appear in PreSonus Hub right now when I look for it.

I am using the Professional edition, 6.5, on a Windows 10 PC.

Thanks

Josh

Rename Bluetooth on multiple PreSonus Microstation BT 2.1

Thu, 07 Dec 2023 11:04:08 +0000

The University I work for baught many PreSonus Micro Stations BT 2.1 to setup in our classrooms.

We would like to be able to rename each one to reflect the room it is in. As of now teacheers have to forget the last one they connected to because the connections are all named Micro Station BT and do not connect between classrooms and if teachers try to connect to another classroom Bluetooth says Micro Station BT already exists and refuses to connect.

Using PreSonus Plugins in Garageband

Fri, 24 Nov 2023 06:13:07 +0000

So I got RedLightDistortion, hooked it up in the Presonus Hub. I can find the plugin in my Garageband, but when I go to try and access it, I am met with a screen stating "This plugin is not available on your system" and a "manage plugins" button is next to it, which just takes me to the Presonus Hub. Is there a way I can fix this?

How can i filter output signal with Universal Control?

Tue, 14 Nov 2023 14:18:15 +0000

Hello people

I own a Studio 192 interface with Universal Control. Is there any way to apply an EQ filter to my Main Out channel within Universal Control? My speakers have a rampant resonant frequency I wish to compensate for. I can only apply processing to my Studio 192 inputs, but it seems like nothing can be done to the outputs. Is there any setting that could allow me to pull this off within Universal Control?

Is my AudioBox USB96 PreSonus and its associated DAW compatible with Mac OS 14.0 Sonoma?

Fri, 29 Sep 2023 15:44:23 +0000

I am using this interface to run JamKazam app for playing on-line with a band. I'd like to know if this setup will work if I upgrade the OS to Sonoma. Thanks!

Es Posible crear Carpetas para organizar mis Plugins segun mi criterio y necesidades?

Thu, 07 Sep 2023 00:46:48 +0000

No se si es posible organizar los plugins en carpetas a voluntad segun nuestros criterios y workflow

dBu to dBFS in Ampire/Pedalboard

Wed, 30 Aug 2023 12:39:49 +0000

Hi,

I already asked support because its more a question than a feature request. I got the answer to ask this question here so developers can respond. Hopefully i will get an answer :)

Here is my question in short:

As with all analog modeld software there must be some kind of reference level. In my opinion especially on amp sims this is critical to get the most realistic expierience.
Can you give me this number(s) for your products? (Ampire/Pedalboard)
example: 1Vac = 0dbFS or xdbu = xdbFS
with this information + the knowlege of how much input headroom my interface has i should be able to get the best (most realistic) performance out of your plugins, without guessing how much input i need that the software reacts like the real deal.

Here it is explained in more detail why this would be important:

In real world you would take your guitar and plug it straight into the amp (not considering any pedals for now). Lets imagine you do this with a low output pickup guitar. now you dial in a clean sound but its almost on the breakup. Now without changing amp settings you plug in a high output guitar instead. The amp would start to distort and to compensate you would need to lower the gain knob on the actual amp. In real world there is no such thing like input gain.
But since we can not simply "plug into the amp" in digital world, we need an audio interface. But every interface has a different way to convert dBu to dBFS. Some have more headroom some have less.
To overcome this, you could say, "aim for (e.g.) -18dBFS". but thats also not very practical because what you do essentially is to put a volume pedal between the amp and the guitar and adjust it till your low output pickup guitar is as hot as a high output guitar and vice versa. you will loose a lot of characteristics from the guitar/player by doing it this way.
The second way to overcome this is to just look up your specs of the interface, e.g. On my Babyface Pro FS i have "maximum Headroom: 13dBu @ 0dBFS". (but as i said, this will vary from interface to interface)
The only thing i have to do that i get maximum Headroom is to set the Interface input gain to "zero gain".
I will come back to this later because now we run into a second problem for amp sims.
Im not a dev so i dont know how all this works exactly. But for me, since a software can not handle any dBu or Voltage values directly there must be a reference point set by the developer. Basicly telling the software how a certain dBFS value is related to a real world dBu value. Lets say this value is 18dBu = 0dBFS.

Now combining both informations together, i know that i would have to lower the input by -5dB in the software to "get to 18dBu=0dBFS". (i know, it may sound contraversial that its -5 and not +5 but it is like that...).

Basicly you have now removed this volume pedal caused by the interface. With this you also made sure that you keep all characteristics from different guitars, playing styles, etc. Exactly like on the real amp.
With the "second step" you made sure that when you plug in your guitar to the sim and set the gain on the amp at e.g. 5, it should now be as close as it can get to the same guitar plugged into the real amp counterpart and set to the same settings.

Its nice to be able to set the input gain to taste and experiment with it, but i think for an simulation the most important thing and first intention should be realism.

I can only guess but i think for Ampire/Pedalboard (at least for the MCM800 Model) it is somewehere around 24dBu = 0dBFS? This setting would give me the response from the model that i would expect from the real deal. (but its just a guess...)

Only downside to this is that if you set your interface input to "0 gain" you can get problems with noise but with most modern interfaces this should not be the case.

Feature Reqest:

i think the easiest fix would be to just explain it in the manual. It would be extremly helpful for people who want to use it this way. And for people who dont want to do it, they can use it like before. Nothing changed other than a bit more text in the manual :)

Looking for UC Surface download for older iPad2

Sat, 05 Aug 2023 13:25:33 +0000

I am looking for the UC Surface download for an older IPad. Its an Ipad2 with a version 8.3 OS. We use the Gen2's because if they break we can get another for $25 :). But I have to be able to download the version again. Its a APK file I believe.

Any help would be GREAT.

Thank you all again

Impossible de trouver altiverb // Impossible to find altiverb

Fri, 04 Aug 2023 17:52:17 +0000

Salut à tous,

J'a installé le plugin Altiverb et je le vois quand il scan tous mes plugins. Cependant une fois dans un projet le plugin n'apparaît nul part que ce soit dans le gestionnaire des plugins ou dans la liste. Est ce que c'est déjà arrivé à quelqu'un ? J'ai la dernière version de Studio one 6.2.

Je suis en train de désespérer.

Merci de votre aide

ENG VERSION

Hi everyone,

I have installed the Altiverb plugin and I see it when it scans all my plugins. However once in a project the plugin does not appear anywhere either in the plugin manager or in the list. Has this ever happened to anyone?

I'm getting desperate.

Thanks for your help

Location Presonus Plugins for ohter DAW

Sun, 11 Jun 2023 18:53:30 +0000

I bought Fat Channel plugin and presonus artist, but I can't access the plugins through another DAW, I tried the addresses that are in the studio one folder options, I tried to configure the folders in Dorico and Cakewalk and it didn't work, the other way was look for it through the file browser but I don't know any exact file name to look for it, so I can't locate it that way.

Presonus Hub Authorization Issue

Sun, 19 Mar 2023 10:22:04 +0000

Hi. I've seen the solution to make a presonus hub folder but it already made one when I downloaded it. The plugins downloaded successfully into my DAW but I can't use them because it wants them authorized. I have a Mac. The authorization button loads and then won't open when I click it. Is there another solution I could do since the folder and plugins are already there but just needs the authorization button to work?

Are ALL Fat Channel Plugins compatible with StudioLive 64S Series III mixer?

Sun, 29 Jan 2023 01:35:11 +0000

I have a new StudioLive 64S Mixer .
I have Fat Channel Volume 1 plugins included FREE with StudioLive 64S, so I know its compatible.
However, at shop.presonus.com it lists compatible mixers for ALL Fat Channel Plugins were compatible up to the 32 Mixers size, but none showed the 64S mixer in the compatibility list?

I assume that ALL Fat Channel Plugins listed as compatible with StudioLive 32 Series III would be compatible with StudioLive 64S Series III, but wanted to confirm before trying to install?

Is the 64S just so new its compatible, but just not listed yet?

I have a few additional Fat Channel Free plugins I wanted to add, but same thing, only shows up to 32 mixer.

Thx in advance,

Channel Strip Collection / VT1 Tube Modeling Channel Strip - Significant Volume loss

Wed, 18 Jan 2023 20:16:36 +0000

In Studio One 6 Studio One 6.0.2.91029 macOS ARM64 (Built on Dec 9 2022) I created a new preset in VT1 Tube Modeling Channel Strip and activated it on my Main, it sounds terrific, too .

I then save and close the song.

Later when I open the same song the volume has dropped @ 15-20db. If I inactivate the preset I created my volume is bock (minus of course any that was added in the plug-in I created).

This occurs with all presets that I have tried to create in VT1 Tube Modeling Channel Strip. I like this plugin.....

macOS Monterey 12.6.2

Mac Studio (2022) M1 Max

Ampire no factory presets list avaible under Logic X (no presets)

Sun, 20 Nov 2022 20:42:55 +0000

Hi,

I installed the Presonus Hub to be able to load Presonus plug-ins compatible with the Hub application on third-party DAWs as well. I state that everything works well and the product in question (Ampire) is duly authorized. However, on Studio 0ne the list of Ampire factory presets is available while when I load the same plug-ins on Logic X via the Hub application, it's no longer possible to access this list (no menu appears as it happens in Studio One): If I press the document-shaped icon at the top left I get the writing (no presets). The question is: should I assume this behavior is normal or did I make some mistake during the installation?

Thanks in advance for any useful information in this regard.

How do I set up my FIVE Studio 68C for student use and Studio one? They can not see the loops and other instruments.

Tue, 01 Nov 2022 18:46:16 +0000

I purchased Studio one and five 68c interfaces to use in our school music studio. Each has their own PC. How do I obtain a site license or activate individual accounts for the students so that they can see all of the add ons - loops instruments etc.?

Ampire compatible with MIx Craft

Sun, 02 Oct 2022 10:15:47 +0000

I bought Apire because in your information is written that it also works in other DAW's as Presonus. However, it does not work in a right way in MixCraft (the DAW I use). What is the solution for this problem?

Is there a way to use arrange drums in S1 grid editor rather than EZ Drummers?

Sat, 24 Sep 2022 19:55:08 +0000

I really like EZ Drummer as a program, but the grid editor is frustrating as all hell. Is there a way to create the drum arrangement in S1 rather than EZ Drummer 3? Ideally the drum names would show up instead of the note names (C#3, D2, etc.) and they would correlate with the order shown in EZ Drummer instead of being completely random with a bunch of duplicates like it is right now.

I've been looking for an answer for weeks and it doesn't look like anyone else has asked the question, so it must either be obvious or impossible. If it can't be done, is there a decent drum program that does allow this?

Add Pitch Shift and Time Stretch To Audio Batch Converter

Sun, 14 Aug 2022 10:01:07 +0000

After using Audio Batch Converter, I found it's great potential for doing sound design. By adding pitch shift and time stretch, it would just act like like "The Rack" in Soundminer,

This link below is a reference

https://www.youtube.com/watch?v=7f2mg2n8U_8&list=PLX2xDtYH9G8uOnUzJrXa87jYhWAj0gD8i&index=25

Really hope to see this function implemented.

Does anyone know how to fix a driver issue for presonus revelator microphone?

Sat, 02 Jul 2022 10:26:44 +0000

Hi,

I have been struggling for days on this.

When i plug in my USB microphone (revelator) into my laptop the microphone turns on and all the lights are blue, but when it comes to the installation i keep getting a message saying

Device USB\VID_0000&PID_0002\5&c72d3e8&0&2 had a problem starting.

I have raised a ticket with support and i have tried 3 laptops all with same message. cannot find driver. is there anyway i can install a manual driver for the microphone to recognise my laptop via connection? or anything that could possible work to fix the problem.

I am a complete novice to this and its bringing me down a bit now that i cannot find any solution on how to fix it.

hope someone can help me, images are attached below of issue.

Mix engine fX SHOULD BE Compatible with presonus hub & Other DAWs

Tue, 07 Jun 2022 01:05:47 +0000

I am not a S1user nor am I sold on making the switch but I have been watching PortaCassette tutorials & feature/preset walkthrough videos for over a year now. To my ears it is by far the closest true emulation of how a recording to cassette tape actually sounded. Not long thereafter I read about presonus hub. "Perfect!" I thought. Joined sphere three days ago; activated a S1 license & the rest was smooth sailing. WRONG. Spent a large portion of my weekend pulling my hair out & troubleshooting. Apparently mix fx plugins cannot be used in other DAWs. Why not? Tech support states:

"Mix Engine FX are "special plugins" for Studio One. No other audio workstation even supports that format."

I call b.s.

I literally only joined sphere to use ONE PLUGIN via the hub

somebody at Presonus rectify this

Can't hear 3rd party plugins in playback.

Thu, 02 Jun 2022 07:30:38 +0000

Hi folks! I'm using Studio One in combination with a Studiolive III SX. I've installed some 3rd party plugins successfully and I can see them in Studio One and in the mixer in DAW-Mode. But I can't hear them. Playback function is enabled. I'm using a 2020 Mac Mini with Big Sur. Thank you!

How to deactivate add ons ? Thanks

Fri, 06 May 2022 08:38:53 +0000

Hi, how to deactivate add ons? I get problem with Presonus Fat channel XT,not see the plugins add-ons in my studio one,but they are activated in presonus hub. Basic Fat channel xt is working correctly. Fat channel XT add-ons worked very good at first time, but I had to reinstall windows,and then it is not working well. Presonus Fat channel XT vol.1 sounds amazing.Thanks

Mirror settings from a StudioLive Series III Fat Channel to other DAWs via PreSonus Hub plugins

Wed, 02 Mar 2022 21:43:17 +0000

Include the ability to mirror / transfer settings from a StudioLive Series III console / rack mixer's onboard Fat Channel to other DAWs via PreSonus Hub plugins. Similar to what can already be achieved with Studio One, but instead being available within, say, Logic.

Presonus Ampire BDL compatible with GarageBand on iPadOS

Fri, 03 Dec 2021 11:02:37 +0000

Hi, I`m considering to buy Presonus Ampire BDL. Is this Ampire plug-in compatible with Garageband on ipadOS or iOS, or do I have to use a MacBook or IMac?

Thx for info, much appreciated!

Heinz

Upgrading Pro EQ2 Idea

Tue, 02 Nov 2021 05:15:20 +0000

Good Day my name is Kiran Nembhard I am from Jamaica I have an idea on the Pro EQ2 plug in. The plugin can be upgraded to add a double or triple frequency selection for mastering and mixing within the just one plugin. These are follows; Mid, Lows, Low Mid, High Mid, frequencies.

So instead I use three different Pro Eq2 of the same plugin to get the sound I want I could use one instead.

Best Regards,
Kiran Nembhard
Mad Medz

zusammengefasste Events mit VocAlign Project 5 bearbeiten

Tue, 12 Oct 2021 19:57:33 +0000

Hallo,

ich bin ganz neu hier und noch ziemlicher Anfänger mit Studio one. Mein Problem: Um mehrstimmigen Gesang zu synchronisieren, habe ich die einzelnen Stimmen "zerschnitten" und die Schnipsel von Hand verschoben. Das Ergebnis ist brauchbar, aber nicht optimal. Das Plugin VocAlign Project 5 verspricht Hilfe. Tatsächlich ist das Resultat von zwei Stimmen in je einem Event verblüffend gut. Die beiden Gesangstimmen laufen wunderbar synchron. Nun das Problem: Die Führungsstimme besteht aus mehreren Events, die ich mit "G" zusammengeklebt habe. Dieses neue Event wird von VocAlign nicht akzeptiert. Kann man das "zusammengeklebte" Event, das ja intern noch aus seinen Komponenten besteht, in ein "echtes" Event umwandeln?

Danke für die Hilfe!

Do VST plug-ins work with Studio One Artist 5 running Windows 8.1?

Mon, 27 Sep 2021 02:55:49 +0000

The computer that I've currently got Studio One running on is a Windows 8.1 Home computer that I don't believe can be upgraded to Windows 10.

Will third-party VST plug-ins work with Studio One Artist 5 running Windows 8.1 (not Windows 10 as officially recommended by PreSonus)?

Presonus Analog Effects Collection are not showing in other DAWs via Presonus Hub as it says they should on the website.

Thu, 09 Sep 2021 12:52:38 +0000

Presonus Analog Effects Collection are not showing in other DAWs via Presonus Hub as it says they should on the website.
My Presonus installs are fully updated with Sphere on a PC.
e.g Older Presonus hub items are showing in both Bitwig and Live.
List :- Ampire, Fat Channel, Pedalboard, RC500. VT1 , VU Meter

How can I accept recent terms of use during activation of my Studio one 5 prime?

Sun, 05 Sep 2021 10:02:32 +0000

I can not activate my Studio One 5 Prime because I can not accept recent term of use

How can I use "non-presonus" sounds or loops I bought?

Sat, 28 Aug 2021 14:00:41 +0000

I want to add new sounds and loops to Studio One 5 Professional and I need a little help. Do I need to put the file in an specific folder or how does it work? Thanks for any help!

Free Plugins and expansions activation not installing

Fri, 27 Aug 2021 16:53:25 +0000

The Free plugins like saturation, VU meter, MVP loops etc. are no longer installing and keeps mentioning that "It is unable to connect" even though the system is connected to internet and updates and news of studio one are being received via the same. Please fix this issue as soon as possible.

What is Articulator used for?

Fri, 09 Jul 2021 01:05:34 +0000

What is Articulator used for?

How many presets are on Studio One 5 when recording a track. How many is too much , will it cause my program to crash?

Fri, 09 Jul 2021 01:05:19 +0000

Hello, I’m currently new to this software program and a beginner I just started trying to learn everything I need to know about recording music, making beat, mixing and mastering, basically everything the whole production and logistics of music. I just started practicing on a sample recording trying to fix it but I have gotten to a point where I have like 50 presets or maybe more and I’m questioning if I’m doing too much? is it going to mess up my track or is there a better way to do the presets so it’s not so much?…

PreSonus Hub MacOsx 10.12.6

Wed, 23 Jun 2021 12:27:43 +0000

hi!!

Where i can download the Presonus Hub Installer to Mac Osx 10.12.6 Sierra?

Thanks

Not seeing the Retro Mix Legends plugins

Tue, 22 Jun 2021 19:59:17 +0000

I’ve purchased the Porta Cassette and then purchased Alpine Desk and Brit Console. I see that the Porta Cassette appears when I open Studio One 5 but I’ve registered Alpine & Brit but they’re not showing up in Studio One. Can someone help me?

Thanks,
Anthony (Shawn Diggz)

Loom 2 and Hybrid 3 PlugIn for Studio One Artist?

Mon, 21 Jun 2021 12:44:11 +0000

Hi,

I had just bought a package of three ADSR plugins; Loom 2, Hybrid 3 and The Riser.

However I only got the Riser to show up in my Studio One Artist. ADSR informs me the plugins only work for Artist (or I need to download the ReWire). But... It might work if The Riser did work. So I'm kind of confused if this is a definite yes or no. I also made the mistake of not using iLok and skipping the Loom 2 and Hybrid 3 registration the first time I started up Studio One Artist (because at that time it did recognise the plugins and asked for a registration code). Realising I should've registrated at start I did enter the registration code for The Riser and now that's the only one visible so far.

Tried removing, re-installing... iLok shows I have succesfully registered. And the plugins are in the correct folder.

Any help is appreciated, because I like to know for sure before I upgrade or purchase any other software to make this work (an Upgrade to Artist had been on my mind, but I am doubting if I would make much use of the extra's that come with it).

Thanks!

Bjorn

in logic pro x fat channel will not instal give message that target directory is lock by presonus plugin format adaptor

Sun, 20 Jun 2021 04:29:42 +0000

in logic pro x fat channel will not instal give message that target directory is lock by presonus plugin format adaptor

Cannot install Fat Channel Catalina

Fri, 18 Jun 2021 13:21:22 +0000

Have bought Fat Channel. ProSonus Hub doesn't authorise computer. Unable to authorise computer or Fat Channel. Seems 100s of users having same issue but you seem to be ignoring everyone. Please help.

Running Logic with Catalina

Dean