- Recent questions in Studio One+ Feature Requests

Add Automatic Save New Version option when opening or closing a Song

Fri, 09 Aug 2024 12:44:09 +0000

Please create a Preference option to enable Automatic Save New Version to prompt the user to save off a version when opening or closing a Song if they so desire. Not just a regular save, but a saved version. Take the part about remembering to do it yourself out of the equation if folks want that. (And I really really do)

This way, you could always have a version to fall back on, even if you forget to make the version save yourself.

Iterative file names

Wed, 31 Jul 2024 11:57:48 +0000

Considering the fact that, by default, Studio One exports mixdowns as Mixdown.[ext] inside the /[project]/Mixdown, it stands to reason that it should also be able to iterate file names so that Mixdown.[ext] is followed by Mixdown-1.[ext]. Otherwise, we end up with directories with file names which were decided upon by the operating system, and which are very difficult to navigate.

Step Sequencer Improvement

Thu, 25 Jul 2024 14:37:01 +0000

This is how Studio One can rule them all. If possible , please literally steal all the features of FL Studio’s Step sequencer ( from how to delete to how to easily use sliders ) Like everything from them… also that would be really cool to just drag samples right on tracks without any plugins and start using a kick or a snare for example right away

Improvement to the workflow of the Project Page

Thu, 25 Jul 2024 14:32:31 +0000

Simple but makes a world of a difference. Can you please allow us to select our wav for ( right from the wav form ) like in song mode … make the cursor have a plus where we can select the hook of the song if we want to … right in the grid 1/16 , 1/32 etc … it’s not practical at all when trying to select a specific part of the song… that would be really make things easy … and please add colors to the tracks , not just the top part.

Scanning soundsets delay start of studio one

Wed, 24 Jul 2024 14:04:00 +0000

Since i have installed several soundsets, S1 start is lasting very long.

I wish S1 has a "disable scanning soundsets at start option like the plugins have.

Even when S1 is ready, the browsers behavior when opening the loops section and their subfolders is laggy (several sec.)

The indexing process of S1 could be improved, to achieve a faster response like Ableton or Bitwig

Chord and Lyric Track API

Sun, 14 Jul 2024 05:56:24 +0000

Would love to see an api for the chord and lyrics tracks in Studio One.

VJs could use lyrics straight for Studio One. Could add lyrics and chord on stage. 3rd party plugin devs like Toontrack could use it for integration with chord tracks in EZkeys, EZBass, etc..

Chord Chart (with lyrics)

Sun, 14 Jul 2024 04:57:56 +0000

Would love to see Studio One be able to create chord charts with lyrics.

This is based off the chord and lyrics tracks and different to the charts for instrument parts with midi. Particularly useful for songwriters to give to their band for the band to come up with their parts.

Switch between channel insert plug ins with keyboard shortcuts or other

Mon, 08 Jul 2024 22:46:37 +0000

I love to to be able to set up keyboard short cut or via a controler to view next or previous plug in

When you open the channel editor any have more than one plugin inserted, it would be nice switch between the plug in windows without using the mouse.

Like a next insert/previous insert fx .......

Unless it's already possible?

Adding a multitimbral instrument does not increment the output channels

Sat, 22 Jun 2024 21:07:47 +0000

When I create a new set of tracks to be assigned to an existing instrument, the MIDI input channels are incremented, but all of the outputs remain on the first set of output channels.

For example, say I add a packed instrument containing 16 channels. In the "Output" options, I select "Existing Instrument" and check the "Ascending" flag. What happens is 16 new instrument tracks are created with MIDI channels incrementing from 1 to 16. But the output channels for all 16 tracks remain on output channels 1 and 2. Instead, I have to go through every one of the new tracks and manually increment the output channels.

More than one Ara PlugIn on one Clip

Tue, 11 Jun 2024 08:48:54 +0000

With more very useful ARA PlugIns, i would like to have a more practical way to use more than one Ara PlugIn on One AudioClip.

It could work with a per PlugIn freeze unfreeze function, wich would be very useful for channel insert FX too.

It would be much more practical in a lot of situations than always a full render of a track or clip.

It would be much more practical for certain undo actions in the workflow

thanks

regards m i k e

Splitter mode "Source split" for sidechaining latter plugins in insert-stack

Sat, 08 Jun 2024 15:18:17 +0000

"Source split" or something like that in "modes" of the Splitter, that would essentially create a new "ghost track" from that point of the insert stack, so that you could use it as Send on Sidechain in the latter effects placed in the insert-stack of the same track.

I.e. all in same track:

Add some effects in Inserts
Add Splitter in Inserts with "Source split" mode (<- "Source-point" is created)
Add some more effects like delay and reverb in Inserts
Add a Compressor in Inserts
In Compressor you are now able to pick the Splitter-generated Source-point of this same track (before delay and reverb) as Sidechain Send. This way, you can use the signal before source-split to duck the signal after it, all in a single track.

Why:

Much like with all the other modes of the Splitter, this would drastically reduce the number required FX channels / complexity of your project. "Dry ducking" with particularly delays and reverbs is such a basic thing, yet plugin manufacturers don't bake it in their plugins for some reason, I think it it should be simpler to achieve in DAW somehow. Being able to handle it with a single Splitter within the insert stack seems much simpler than using separate FX channels.

If there is already a way to do something like this that I haven't yet figured out, please feel free to provide some guidance!

I think this (+11) thread is essentially about the same thing (btw it's a bit misleading that the main category of Studio One Feature Requests is not shown anywhere, can't tell if a feature request or in some other area if you e.g. search stuff in here)

Scroll wheel + Modifier to adjust hovered Track height

Mon, 27 May 2024 19:42:02 +0000

i see Shiftt + scroll = horizonal scroll

Ctrl+shift+ scrool = Zoom

on windows i dont see the alt button being used

can we get something like

Alt + scroll = Track height zoom

Ctrl + Alt + Scroll = Highlighted or hovered track height zoom

maybe something along those lines would be really helpful.

The ability to block or mute users on the Studio One+ Community page

Tue, 21 May 2024 19:57:31 +0000

Please add the option to block or mute users on the Studio One+ community. It's pretty standard in most forums and socials, would love to be able to do the same on there.

Updated Warping/Timestretching implementation for drums.

Sat, 18 May 2024 02:28:31 +0000

Please update the time-stretching, transient detection, and warping functions in S1 to provide more accurate slice detection and additional options. Specifically, it would be beneficial to have the option to disable the translucent marker for attack look-ahead during auto-detection.

I understand that overhauling the entire warping and time-stretching functionality is a significant undertaking and that it may be challenging to match Ableton's capabilities. However, implementing highly accurate auto transient slicing with MIDI file creation could substantially bridge the gap when combined with the existing "tape-resampler" algorithm and MIDI groove quantizing functionality.

With improved auto-slicing, S1 could also introduce a "rex" option in the time-stretch menu, allowing users to bypass warping altogether.

Stem separation - SO jealous of Logic users...

Fri, 17 May 2024 21:32:10 +0000

Stem separation - SO jealous of Logic users...

Request to Add Feature for Dragging MIDI Data from DAW Tracks Directly into Instruments with Riffer Piano Roll

Thu, 16 May 2024 03:08:15 +0000

Hello everyone,

I would like to propose a feature request for the next update of Studio One. It would be incredibly helpful to have a feature similar to Cubase, where users can drag MIDI data from a DAW track directly into an instrument that supports a Riffer piano roll for editing.

For example, the Konghou plugin by AmpleSound allows users to utilize its Riffer feature for complex MIDI editing. If Studio One could implement this capability, it would greatly enhance the ease of creation and editing, significantly improving workflow efficiency.

Please support this request. If you also wish to see this feature added, kindly leave a comment below. Thank you!

Transport: forward and backward by video frames

Mon, 13 May 2024 00:12:02 +0000

Because I've been using Studio One to score video, it would be very helpful to be able to move the transport head forward and backward by video frames.

Automation scaler (in both dimensions time and value range)

Sun, 12 May 2024 18:41:05 +0000

Automation scaler (in both dimensions time and value range). i know transform tool is not suitable way accurate and i want scale using precents. and of course needed work only selected area. also is paintful use transform tool also its not accurate for all uses. and i want such way works also values what are both negative and positive. if there is allready macro for this or something else than transform tool please tell.

Auto-recognise load new plugins and presets when old plugin is missing

Sat, 11 May 2024 13:07:40 +0000

Hi there!
I recently updated some third part vst plugins to newer versons.
When I load songs / project which where using these old version Studio One usually notifies/informs the missing plugin.

Could it be possible to add a feature that automatically recognized and loaded these newer plugins version in place of the old ones?

Best reguards!

Waveform Color for dark colored audio parts

Thu, 09 May 2024 15:34:56 +0000

Hello,

currently the audio waveforms are all displayed in black, regardless of whether the part is light or dark in color. While for the light parts there is no problem, for the parts of dark color it would be convenient to be able to display the waveform in light color, perhaps of the same gradient as the color of the part. The midi parts quietly display the data in light color, I hope it is possible to have it available for the audio parts as well. I'm bored making comparisons, but it's the thing that is currently possible in Logig, Pro Tools... Studio One is no less ;)

Thanks, hope in your consideration

Can there be a DI feed routed off the input channel in parallel before Ampire Placed on Input aux?

Tue, 30 Apr 2024 03:46:10 +0000

I was wondering if you guys could implement so that when we plug guitar in direct, if we can take a Di feed before we place Ampire on that input channel strip in to record the Di on a track? (because I like to print my ampire audio for preproduction on audio tracks but I have no way to take a Di off this feed before it gets to ampire on that input aux thing. this would then prevent the need for even using a Di because splitting things in the analog physical world is more prone to noise when sending an unbalanced guitar to multiple places. But also just for convenience sake to not need an extra device and extra connectivity.

Loudness processing in Audio Batch Converter

Tue, 16 Apr 2024 16:48:05 +0000

It would be great if the newly added Adjust Loudness function from the export menu in Studio One 6 was also available as a processing tool in the Audio Batch Converter.

Suggestions for Studio One's Immersive Audio Production Features

Fri, 05 Apr 2024 02:30:04 +0000

Dear team,

I am a Studio One+ user, having used it since its third version.

I use Studio One for all my mixing and mastering work, including the latest
Dolby Atmos mixes. While using version 6.5 for Dolby Atmos music production,
I greatly appreciate the convenience that Studio One provides. However, I
still notice some features that could be added or bugs that need to be
fixed.

1. I often use some CPU-intensive plug-ins for basic sound processing. I may
adjust the Surround Pan/Object Pan of sound elements while changing EQ and
compression plug-in parameters to get the best positioning and tone. When a
track is adjusted, I usually render the track to save CPU resources.
However, I found that if my track is in Object Pan mode, the track will
automatically switch to Surround Pan mode after rendering, and I cannot
recall the positioning information adjusted with Object Pan before. I hope
Studio One can only render effects when rendering tracks. The rendered
tracks retain the original Surround Pan/Object Pan mode and the previously
set position information. This will save me several hours of recall time for
Pan parameters.
2. In stereo mixing and mastering, bus processing is a great technique,
especially in styles that require powerful and punchy drum such as rock and
electronic music. But in immersive audio production, many sound elements use
Object, so they cannot be routed to a bus like traditional bus processing.
To get the sound characteristics brought by bus processing, I will mount the
Fat Channel plug-in on the Main Bed (many good compressors support 7.1.2
multi-channel processing), and then I will copy the Fat Channel to the
remaining Objects. The effect is very good. But when I want to adjust Fat
Channel parameters, things get complicated. Studio One currently cannot
adjust the same plug-in on multiple tracks at the same time. I hope Studio
One can add a Plugin-Link function similar to Cubase/Nuendo or ProTools,
that is, multiple grouped tracks can choose to control their plug-in
parameters simultaneously. If there is such a function, it is possible for
us to do "bus processing" for Bed and Object at the same time. This function
can better combine immersive audio and traditional stereo craftsmanship and
more conveniently get better sound. We really need such a function.
3. Next is the suggestion about Surround Panner and Object Panner. I noticed
that Studio One's Surround Panner is a hemispherical space (similar to Logic
Pro), but in actual music production, we find that Panners such as Dolby
Atmos Music Panner, Nuendo, and ProTools are more convenient to use. We need
control parameters such as front diffusion and rear diffusion to provide
more possibilities for sound field design.

In addition, we often need to set the left and right channels of stereo
signals separately to different positions in space. In Studio One, both
Surround Panner and Object Panner do not give users a choice, whether to
adjust left and right channel signals together, or to adjust them
separately. We hope to only switch the link between the left and right
channels through a button in Panner, or to split them for adjustment.

If I am not clear in my description, please refer to ProTools's
Surround/Object Panner. Although Studio One's Panner is beautiful and
friendly to new users, in the real mixing process, we find that we still
need a Panner like ProTools‘.

We hope that in the next version, there will be another mode similar to
ProTools Panner for us professional users who have needs.

4. Studio One's Surround Delay and Open Air Reverb are great, and most of
the native plug-ins also support 7.1.2 processing. We think this is where
Studio One is better than any immersive audio DAW. I hope Studio One can do
better:
4.1. More Surround Fx, such as Chorus Flanger Phaser, Auto Pan/X-Trem,
etc., similar to Logic Pro's effects, which will convert stereo into 7.1.2
channels.
4.2. All dynamic FX that support multi-channel processing, such as the
powerful Tricompe, MultibandDynamics, Fat Channel Compressor, etc. Add
Channel Link adjustment for them, so I can focus on processing the Front
signal, let Drum, Bass, and Vocal stick together; then reduce the treatment
of the rear and sky channels, to make the atmosphere sound more relaxed.

Thank you for reading this. I love Studio One and hope it can get better. If
I see the above problems improved in the next version, I will be extremely
grateful.

Best regards,

Yuanming

Auto expand folders on focus

Wed, 03 Apr 2024 17:10:45 +0000

Just like when a track is solo'd and a different track is selected, the solo-state follows. If an optional "auto-expand" mode is selected, the selected folder would expand all the way, and the previous folder automatically collapses.

Track and folder default height and locking

Wed, 03 Apr 2024 17:01:01 +0000

Can you add the ability to not only set the default height for tracks and folders, but the ability to lock track height per track as well.

Prevent tracks from inheriting group folder colors

Wed, 03 Apr 2024 16:56:50 +0000

NOTE: For some reason this posted three times. I have no idea why.

I like my tracks to be a different color than the bus folders. It helps them stand out more for me. The problem is that every time I change a folder color, all the tracks change too, and i don't want that. Could you add a flag to prevent this from happening.

Also, it would be so helpful if a robust user-defined color scheme where colors could be assigned at different folder levels, by instrument type, optional alternating track colors, ability to lock track colors, etc...

Prevent tracks from inheriting group folder colors

Wed, 03 Apr 2024 16:56:20 +0000

I like my tracks to be a different color than the bus folders. It helps them stand out more for me. The problem is that every time I change a folder color, all the tracks change too, and i don't want that. Could you add a flag to prevent this from happening.

Also, it would be so helpful if a robust user-defined color scheme where colors could be assigned at different folder levels, by instrument type, optional alternating track colors, ability to lock track colors, etc...

Prevent tracks from inheriting group folder colors

Wed, 03 Apr 2024 16:55:36 +0000

Please Add Command Line Support (for Windows) - particulary Load/Unload Song, Play, Rewind to Start, and Stop

Mon, 01 Apr 2024 20:54:10 +0000

My intention is to run an external playlist of S1 Songs for live use.

"Show Page" doesn't simply run S1 Songs, so no MIDI automation is supported for external devices.

Show Page is also too time consuming and duplicating of storage space to simply run the original song files in a live show environment with options to play one song after the next, or wait for key press, and mix-n-match those options throughout a set.

Post no 1276 about a f*****g LFO Modulator

Wed, 27 Mar 2024 09:18:27 +0000

Paging the S1 staffers: how many threads are there about this, now: 50, 100, 1000?

How can such a simple, basic request have been routinely ignored when competitors have had them in place seemingly forever and people have been asking for it for years?

So - YET AGAIN - LFO tool in S1, now, please!

Here are som simple fixes so the S1 Team don't even have to think:

Add a third "modulate" option after tremolo and pan in the XTrem plugin and specify targets via a drop-down
Add a MIDI-effect with sine/triangle/square/saw/S&H/noise which can be routed to multiple targets via macros

There is no excuse for this. Sort. It. Out!

Why does the content of the edit window always change when I select an event in the arranger window?

Mon, 18 Mar 2024 18:32:14 +0000

I want to double a midi kick with an electric bass, this is programmed very randomly in djent style, so I want to let it run in the edit window while recording so that I can see the kick hits. If I briefly select another event in the arranger window, for example to delete the last recording of the e bass, my MIDI track has disappeared from the edit window and switches to the selection that has now been made (I don't want that behavior). A "Edit window content lock" is the solution... you can edit the selection like midi notes etc. in this window but the content doesn´t change if you make a selection change in the arranger window.

sorry for my translation

Studi One 7 should be able to add

Sun, 17 Mar 2024 19:03:49 +0000

Studi One 7 should be able to add automatic bass and rhythm to
the music we prepare! Midi feature should be more advanced, there should be
Autotune features such as vocal and instrument detone and voice shifts! ...
Must be able to offer alternative options!...

Save Impact and Sample One samples with the song!

Sat, 09 Mar 2024 16:51:03 +0000

Saving a song should save all the resources used in that song in the song folder or at least there should be an option to do this.

I just moved to a new computer and all the songs using sample one did not load fully as the samples are not saved with the song!

You have to manually save all samples into the song folder if you want to be able to load your song on any computer.

Save Impact and Sample One samples with the song!

Sat, 09 Mar 2024 16:49:39 +0000

Save Impact and Sample One samples with the song!

Sat, 09 Mar 2024 16:49:05 +0000

Save Impact and Sample One samples with the song!

Sat, 09 Mar 2024 16:47:31 +0000

Save Impact and Sample One samples with the song!

Sat, 09 Mar 2024 16:46:24 +0000

About midi velocity edit in PRV

Mon, 26 Feb 2024 14:54:06 +0000

Many DAWs have an option for setting the velocity and durations of new notes to the last touched value. Eg, click on a note with velocity 40% and the next notes added will be the same.
In S1 it seems you can set a default for velocity and duration, and that's about it. If the default is wrong, you have two choices, which are change it ahead of time, or drag the new notes.
Is there to have these defaults automatically scaled to the last note touched?
A tickbox right beside the default velocity section can be there enabling us to "remember last touched note value" when it's ticked.

Have the option to store multiple keyboard maps in the default section

Sun, 25 Feb 2024 13:56:18 +0000

So when you go to keyboard mapping they have the five or so they have and then you can import your own. I would like to be able to add my own and have it in that list PLUS be able to move to those with a shortcut/macro.

Scenario 1 you spent years setting up a custom map, and you now do tutorials. It would be advantageous to be able do a keystrokes to go to the default so you and your student have the same macros to work off of.

Scenario 2 you bought a streamdeck and it has a studio one profile with their custom shortcuts to work with their device. When I'm using the device I want their shortcuts, when I'm not I want my own. Being able to have both maps in the list and set a shortcut to switch between the 2 would be super helpful.

I'm sure there are tons of other reasons that could help others. So please do yall magic and make this a reality

Thanks for coming to my tedtalk

Please create the ability to add an effect to a single "midi" track event in Studio One.

Fri, 23 Feb 2024 19:58:38 +0000

Being able to add a reverb/delay or distortion example to just a single "midi" event would be helpful for those of us not recording waves in the workflow but midi tracks.

add Bus and VCA to folder tracks

Wed, 21 Feb 2024 01:23:42 +0000

Can we please get the ability to add Bus and Vca channels into folder tracks. For example i usually have a Folder track named drums. which has my kicks, snares, claps, toms, overheads, etc. Then I have a paralell bus, effect bus, then after automation i usually add a vca incase i forgot something or need some special adjustments. When i close my drums folder I want all of those tracks, buses and vcas to disappear while i focus on other things. I'm sure that would help others as well.

Can I hook up more than one iPad to the series 3 16 line mixer?

Tue, 20 Feb 2024 02:19:04 +0000

Can I hook up more than one iPad to the studio live 16?

WISHLIST - STUDIO ONE 7

Fri, 16 Feb 2024 06:43:14 +0000

MIDI :

- Track Alternative (from Cubase)

- QSwing (from Logic)

- Event List (from Logic)

- Forced Legato (from Logic)

AUDIO :

- Event Float (from Logic)

PLUGIN :

- AutoSampler exporting all formats

Export Mixdown location options

Sun, 11 Feb 2024 10:13:48 +0000

I would very much like either:

A) an option in Export Mixdown window:
[x] Remember location

Which ticked, Studio One would always remember the last directory location used to Export Mixdown. I.e. Export Mixdown Location would not reset to default, until I untick the box and restart Studio One.

If this option is not touched, then everything works as it does now.

–OR–

B) An option in Export Mixdown window:
[x] Use last location

Which ticked, Studio One would automatically fill in the Location path with whatever directory path was used in last Mixdown Export. I.e. ticking this box would in real-time toggle between Default Location directory path and last used Location directory path.

If this option is not touched, then everything works as it does now.

–OR–

Not preferred, but better than nothing:
C) For Options -> Locations tab -> "User data" tab to provide more elaborate data locations than a single "User Data Location", in order to have a configurable Export Mixdown Default Location.

If this option is not touched, then everything works as it does now.

I saw there were a couple of similar questions (in Studio One 4 area and in Documentation area) all the way from 2018, but none in Feature Requests, so I figured I'll drop it here too, so it won't be forgotten. I'm a relatively new Studio One user and find this location problem very unconvenient in 2024.

Suggestion about Pipeline plugin

Fri, 09 Feb 2024 14:57:36 +0000

Hi team,

I'm a big fan of the Pipeline plugin, but I find it frustrating when I want to mix with analog effects. I have to stop and think, "Oh, I need to use plugins instead, because I'll have to reopen the session to make adjustments, and I've just finished tweaking my hardware." Then I have to find my previous adjustments to work on my session again, which is really frustrating.

My suggestion is this: since it's 2024 and digital technology and artificial intelligence are no longer a secret, would it be possible to create a Pipeline-style plugin that can take a snapshot or neural capture like the Neural DSP Quad Cortex, but apply it to my external effects? This would allow me to reopen an old session without any frustration.

I think this would be a really valuable addition to the Pipeline plugin, and it would make it even more powerful and versatile. Thanks for your consideration!

Thank you

Steams Export (Multitrack) need more comfortably

Thu, 08 Feb 2024 14:49:46 +0000

It would be much more convenient to be able to select tracks for exporting stems like in Cubase or like in Logic Pro X.

There should be a binding of the selection when exporting or the ability to export selected tracks. And also the ability to compose track names. Because the way it is now is not convenient.

Would Like to Save a Preset for Bus (Bus Presets Feature)

Thu, 01 Feb 2024 19:38:48 +0000

Would love to see a feature in an update where one can save all the inserts sends in a given Bus as a saved preset for time-savings on drum busses, guitar busses, etc...(a preset of a series of common procedural plugins and sends you would use, say in a guitar bus, or vocal bus, or group of say bass and drums submix, etc.)

I've noticed that one can save presets for individual effects that are dropped into inserts, etc, however, the workflow would be greatly improved and sped up if there was a preset manager or section in presets which focuses on a bus setup/preset.

Thank you.

Bend markers... compression being ignored during playback

Wed, 24 Jan 2024 04:32:30 +0000

I've seen other people note this same bug. Or at least it seems like a bug, as I haven't seen any solutions.

Bend markers only seem to work up to a point. If you bring 2 markers too close, e.g. you're using one on either side of a moment of silence which you want to compress out of existence, the visual wave form might show the silence to be compressed to virtually nothing, but playback totally ignores any "bending" you have done... the moment of silence lives on unchanged.

If there are limitations, they should be enforced by not allowing the user to stretch/compress where it will only be ignored during playback. Better yet, why not remove limitations and let us stretch/compress as much as we want?

Hopefully I'm just doing something dumb... any help would be appreciated. I'm using Studio One version 4.6.2.58729

Feature request: Automatic per track DI capture

Sat, 13 Jan 2024 16:28:44 +0000

The feature I am requesting is automatically maintaining a DI track for every audio track. The benefit is to streamline workflows that use DI tracks for re-amping later. I envision the following workflow:

Every audio track has a separate DI input setting (global and per track) so that every time I create a new track there is an implicit, hidden but accessible DI track.
- The DI track follows the main tracks 'R' but users must manually activate 'S', 'U', and 'M' where 'M' is engaged by default. In other words, the DI track is visually and aurally transparent by default.
The DI track follows all of the same edits of the main audio track, e.g., splicing, fades, gaining, etc. This is similar to how shared or ghost copies work, but across tracks.
- This is my main pain-point when working with DI tracks. My current workflow requires two separate armed tracks, one for the DI and the other with the amp/effects. When I am capturing ideas and demoing songs I frequently edit the amp track and the DI track gets out of sync very quickly.
When I want to re-amp I follow the normal steps by assigning the DI to an output and arming a landing track.

Depending on how automated and streamlined this feature could be, there is opportunity to offer re-amping as a first class citizen where the user selects the track they want to re-amp, clicks "re-amp", and the DAW supplies the output track in a bin and the track can be drag n dropped anywhere. There would be some one-time setup to enable this but currently that setup has to occur per track.

Can you make a few crucial Post-Audio features appear in Studio One?

Thu, 04 Jan 2024 19:30:12 +0000

Hi,

I love the program and switched from ProTools a few years ago. All works fantastically well in the music realm, but I am hitting some frustrating roadblocks when I work on Post-Audio projects. Can you let me know if I am overlooking a functionality or if it is indeed a missing feature? Here is a list:

_Splitting stereo tracks is an ordeal, could you potentially make it as streamlined as it is in ProTools? In Post, you end up grabbing FX and Background sounds that need to be split to mono regularly. The workarounds are just not an option as they are time consuming and don’t even always work. Turning a track to mono is not always a safe or precise option either.

_A shortcut to play the session at half-speed, which helps for syncing sounds. I believe ProTools is Shift+Space.

_Scrolling(FaderPort)/Nudge values and grid resolutions are not precise or easy to work with when the grid is set to Frames.

If those issues could be tackled it would make the program as solid and even better than its competition for Post-Audio.

Thank you for your time,