Question

Needs some help, I'm trying to connect my outboard compressor to my new audio interface - Studio 192 Mobile. I have 2 additional inputs and 4 outputs. Connected interface audio out 1 to input of compressor, created new mono output in I/O Daw settings, choosed new output in mixer and when i'm trying to play this track i still hear it in right channel and compressor doesn't receive any signal from interface. When i used my old interface all worked fine. Please help.

Answer 1

Technically, there is no direct 1:1 I/O like you would find with other devices.

The outputs are discreet. There is an offset with the output channels seen in DAW software to physical output channels.

EX:
Outs 1/2 = Mains L/R
Outs 3 - 10 = Line outputs 1 - 8
Outs 11/12 = Headphone 1
Outs 13/14 = Headphone 2
Outs 15/16 = SPDIF out
Outs 17 - 32 = ADAT outs

You may also need to Bypass the Universal Control mixer.  It may be too cumbersome to manage UC mixes "and" Studio One routing.

Bypass UC and route/mix only with Studio One.