So I'm having a real hard time figuring out how to correctly route signal with this thing.
My setup: (this is how It was setup previously using the 1818VSL)
Studiolive 16R in Interface Mode
Logics MainStage 3 for all my keyboard sounds and vocal channel strips, effects etc.
Blackhole 16 channel for routing the audio to use with live streaming and live jamming apps like Jamkazaam and Sonobus
So, I create an aggregate using Blackhole and the presonus 16R, so my first 16 channels are blackhole, then channels 17 and up are inputs/outputs 1-16 on the presonus.
With the 1818VSL i was outputting my audio to outputs 3/4 which were blackhole outputs, then my streaming app is configured to get it's input from channels 3/4, but I can't seem to figure out how to set this up on the 16R while still utilizing the analog inputs. I set everything up the same way as It was on the 1818vsl, but I'm getting no audio at all. I should be getting sound out of outputs 3/4 and I'm not. Also on the 1818VSL outputs 1&2 were the same as the Main L&R outputs so I would send outputs 1/2 to my in ear wireless system and the main outs to the FOH, but I'm currently getting no sound out of the main xlr outputs or 3/4
My analog inputs are as follows:
input 17 which points to input 1 on the 16R within the aggregate is my mic
input 18 which points to input 2 on the 16R within the aggregate is an electric guitar
input 19 which points to input 3 on the 16R within the aggregate is an electric bass
I set the system audio output to Blackhole 16 which puts it on inputs 1/2 and I assign a channel strip to inputs 1/2 so I can assign the system audio (iTunes) to that channel strip in MainStage.
