Questions & Answers

What advantage is there to recording to a stereo track vs. separate L and R tracks (or even using all three)?

0 votes
asked Aug 23 in Studio One 5 by roberttrede (1,530 points)

Ladies and Gentlemen (I'm campaigning against the irritating ubiquitous "Yo... Sup?" ... but I digress. wink)

This is a general question about the use of stereo tracks vs. dedicated Left (L) and Right (R) tracks. I'm curious about your opinions.

When recording my single acoustic guitar (using two mikes), I feed one mic into a mono L channel (track), the other into a mono R, then because it's easy to do (toooo easy), I always record a third track in stereo. My theory was that the stereo track could (in theory) be useful somewhere down the road.

As it turns out, that stereo track just adds a lot of work and eats up unnecessary storage space (with all the wav files it creates).
Just as an example, when I edit events in Melodyne, that third stereo track is just one more track I have to deal with there.

Additionally, with the L & R tracks feeding (via buses I have set up for them) into my Main output, that stereo track (also feeding to the Main output through its own bus) tends to "step on" edits and effects I have done on the individual channels.

I also can (in theory) easily create a stereo track if I need one by bouncing the two mono track to it... Or I could (I think) create a stereo bus from the two respective mono tracks.

So my current thinking is that there is almost no (if any) reason to always record into a stereo track in addition to the two L and R channels. I'm seeing a lot of disadvantage in creating and editing three tracks when two would do just fine.

I'm sure stereo tracks have their purposes but I'm thinking I should either choose separate mono tracks or a stereo track... but not both.

Does anyone have any opinions on this? I'm curious as to what you have decided for your own recordings under similar conditions. I'm looking forward to reading your thoughts.

Stay safe, everyone!

2 Answers

+1 vote
answered Aug 23 by cdricblanqui (7,110 points)

I think L&R is better, just because it gives you the opportunity to apply different audio treatment to the tracks,

Adding a stereo is not useful IMHO but may be good for a specific purpose, like for example using special effects with M/S processing on the stereo signal

0 votes
answered Aug 23 by roberttrede (1,530 points)

I don't see a way to reply to your post directly, so hopefully you will see this reply to your post.

Thanks so much for your thoughtful approach and reply. I tend to agree with you that recording to a stereo track may have its uses, in general, however, a person has a greater number of options by recording two L and R mono tracks. Your thoughts confirm what I already suspected. It's good just to hear someone else's perspective.

Thanks again!