Question

I was going to record a live show with the StudioLive 24 series III mixer using the built in SD Card recording feature. I'm also using the StudioLive 24R setup as a stagebox to the mixer using the AVB Audio Network. I have signals running into the channels both from the mixer inputs as well as from the stagebox (separate channels of course). I found I can only record signals from the built in inputs on the Mixer and none of the digital signals coming in from the stagebox. The inputs coming from the stagebox are recorded as blank audio files? I thought the point of this system was to be able to record live shows, but the stagebox seems to defeat the purpose. What am I doing wrong? Why can't I plug into the stagebox, send those signals to the board channels and record them to the SD Card when there is clearly signal coming in? Please Help?

Answer 1

j'ai le même problème.

Sur la carte SD sur la console, les fichiers audio des entrée du studiolive 24R sont vide. Impossible d'enregistrer aussi sur ordinateur via Capture les signaux provenant du boitier de scène.

Pourtant j'ai bien les son venant du boitier studiolive 24R sur le casque au niveau de la console. (je peux aussi envoyer les sons sur les sorties "main' de la console)

J'ai aussi essayé de mettre la carte SD sur le boitier, pour enregistrer directement et là je ne vois pas la carte, donc impossible d'enregistrer.

comment configure t on tout ça pour que ça fonctionne ?

Answer 2

I just discovered that I have this issue too with the 32. I record each week at our church and we just added the stagebox last week. Instead of cutting down the main mix I like to take the direct signal of the pastor to use for uploading messages online. The first week I just figure that I armed the wrong channel and just use the mains which I was able to record on the SD card. But this week I know that I selected the right channel. Nothing was there but I had the main signal. If I can't multitrack using the stage box that real messes up my set up. Any help on this would be very appreciated.

Answer 3

So yes, I did figure this one out... So obviously when you are in Stagebox mode you can select whether to get signal from the back of the board or from the Stagebox on each channel via "Fat Channel"... at this point you will be able to get signal from either source and do your live mix with no strings attached. But, if you want to record to the SD card or USB, navigate to each channels settings and assign the "Digital Send Source" to ("Digital" for the Stagebox signal inputs) or ("Analog" for the mixer signal inputs). This option is available in the channels settings only when the board is connected in Stagebox mode. Otherwise the option won't even show up. Hope this helps and be sure to check each channels Digital Send Source if you are recording a mix of analog inputs and digital inputs. Also you can find the answer to this question in the "StudioLive_Series_III_Stagebox_Mode_Addendum.pdf" on page 9 as well... By the way the person who responded in a foreign language didn't help me at all since I only speak English...lol