Questions & Answers

What do I need to do to get audio from the StudioLive III out through outputs on the networked 32R?

0 votes
asked Feb 11, 2019 in Networked Stage Box by jimchlebak (150 points)
I have a new StudioLive 32 III console, linked via AVB to a StudioLive rack mount 32R. I am receiving audio from the 32R on channels 1-9 and 25-32, but although I select "Network" as my output on the console, say on channel 10, I'm not getting an audio signal out of the 32R on that or any other channel.

One thought I had was that I need to set up inputs on the 32R using UC. (Currently, none were selected.) Do I have to avoid channels that are set as inputs on the console? In other words, if 9-16 are set on the console to input from the 32R, will using UC to set 9-16 as inputs on the 32R "cancel" those channels as sends to the console?

Both the console and rack have the latest firmware (1.8.14273 and 1.10.15552, respectively) AVB is running over CAT-6, although I'm using CAT-5 to run UC from a Macbook Pro (10.9.5), through the ethernet "control" interface.

What do I need to do to get audio that is coming from the console out of the 32r?

1 Answer

0 votes
answered Feb 27, 2019 by jonnydoyle (403,360 points)
Best answer
Firstly you need to update the firmware from v1.8 to v1.10 on the console.

Once done review the following guide.