I have a new StudioLive 32 III console, linked via AVB to a StudioLive rack mount 32R. I am receiving audio from the 32R on channels 1-9 and 25-32, but although I select "Network" as my output on the console, say on channel 10, I'm not getting an audio signal out of the 32R on that or any other channel.
One thought I had was that I need to set up inputs on the 32R using UC. (Currently, none were selected.) Do I have to avoid channels that are set as inputs on the console? In other words, if 9-16 are set on the console to input from the 32R, will using UC to set 9-16 as inputs on the 32R "cancel" those channels as sends to the console?
Both the console and rack have the latest firmware (1.8.14273 and 1.10.15552, respectively) AVB is running over CAT-6, although I'm using CAT-5 to run UC from a Macbook Pro (10.9.5), through the ethernet "control" interface.
What do I need to do to get audio that is coming from the console out of the 32r?
