Question

Can we please have a trim option added where the preamp gain control should be on usb inputs.  The faders have to be way low on USB connected to my mac.  I would turn the level down on the mac, but the volume bar goes away once I choose my mixer as the output device.

Studiolive series III boards.

Answer 1

When you are sending USB audio back to Mac and its too loud and you have lost the volume bar then you need to change the volume on the apps/software or website that you are using. The pre amp on the mixer is not for USB returns into the mixer.

Answer 2

Thank you for the feature request. 

If anyone else agrees or disagrees, please VOTE!

The developers pay close attention to those that are voted on the most. 

You are allowed one vote. You can change your vote later if you choose.

(Here's some helpful info on how to use the voting system)

Please vote the original question / feature request. 

Please DO NOT Vote on THIS response!

Answer 3

This is a real issue. We need to have gain trim even on digital sources right on the mixer. This makes workflows more efficient. Sure, you need to make sure the input signal doesn't digitally clip, but if it doesn't there should be means to turn it down ON THE MIXER. Not at the source computer.

Answer 4

Please Up Vote This! Much needed feature! This is already included on the tape in, but needs to be a selectable feature on every channel! 

Thank you for having already posted this request!