After playing around with a newly bought 32SX, the whole thing with Stereo on that Mixers and UC Surface seems to be completely disfunctional to me, at least completely unintuitive.
Seems to have no Balance Control on Stereo Aux Inputs and Outputs and none on Main Output. No linked gain, no linked routing. Subgroup Busses have Panning link Options, but no Stereo link Control at all. No Balance Control and no Balance link on Sends of stereo Faders?
The Manual says "first adjust Stereo Balance then Stereo width" - but there is no way to control Stereo Balance without removing Stereo Linking, is there? The Possibility of changing width is a nice addon, but Balance is much more important in most situations since many input devices give level differences between stereo channels.
PLEASE do a major Rework of all Mixers Firmware and all UC Surface Versions on that. Nowadays, it is nearly completely unusable.
Any Stereo Signal must have direct Controls for Balance. Stereo width is a nice feature but optional. Stereo Linking must (not should, must! really!) link much more Controls than just the Faders by default. Everywhere.
Please make it possibile to have complete control over the stereo Channel with one Channel Strip on the Mixing Desk. Hide the second Channel Strip by default, nobody needs it. It makes absolutely not a single bit of sense to waste that expensive Motorfader for nothing. Stereo Aux Busses and Stereo FX Busses also need Balance or separate level Controls for the channels. The way it is made now, the Stereo Link Function of the Mixing desk seems to be almost competely useless.
