Questions & Answers

How to connect Roland TD-1 to Audiobox USB 96 ??

0 votes
asked Jul 20, 2019 in AudioBox USB by michalmisztal1 (150 points)

Please help me with figure out how to connect Roland TD-1 to Audiobox USB 96 so I can record and so one in Studio One 4.

Thank you in advance :)

best regards


1 Answer

0 votes
answered Aug 2, 2019 by Jamesrhone1 (200,330 points)
Best answer

We unfortunately don't have specific information for setting up a TD-1. But here is general information on setting up an external MIDI device with Studio One. 

Please read these articles for setting up External MIDI Devices with Studio One 4. The following information is general setup info for using external keyboards and modules that have built in sounds, as well as the basic connections to make the keyboards control instruments in Studio One. This section refers to Studio One > Options > External Devices of the Studio One reference guide: 

In regards to external keyboard setup, continue: 

If any of your keyboards have built in sounds you want to use with Studio One, make sure that keyboard is set to external MIDI clock. Studio One has to be the master MIDI clock in all scenarios. 

1. For the drum pads, or any device that sends MIDI NOTE messages, you will need to:

  • Create a New Keyboard, with the MIDI "Receive From" assigned to the MIDI port the device is connected to, but you don't need the MIDI "Send To." 
  • Don't check any of the MIDI filters, only check filters if you want block a certain MIDI message. 
  • MIDI CC's do not work on this setup.

You will need to do this for each keyboard so the piano keys can control either instruments in Studio One, or to play sounds on external devices that have built in sounds. One thing to keep in mind, when you want this keyboard to control instruments in Studio One, you will need to that keyboards "local control" off.

2. To use the built-in Sounds of a external keyboard, you will need to create a New Instrument with the MIDI "Send To" set to your keyboard MIDI port. Check all the MIDI clock options. This is so when you add a track in Studio One this track can be set to send MIDI out to the external device.

3. To use the surface controls(transport, faders, buttons) of your MIDI device if it has them, you will need to Create a New Control Surface with the MIDI Receive From assigned to the MIDI port the device is connected to. This only works for MIDI CC"s.

  • If the device has transport controls, create a Mackie Control with the MIDI "Receive From" assigned to the MIDI port the device is connected to, but you don't need the MIDI "Send To."

4. Make sure if using an external keyboard with sounds, that the boards audio outputs are connected to the computers audio interface and routed into Studio One so you can monitor and bounce down audio. 

Then check out this article on setting up to record using an External Device: Setting up to record with an External MIDI Device Studio One:  

Best regards,