Hello, friends, thank you for your continued attention.
A big problem:
I'm using DAW Mode in Logic Pro, and ok, I'm able to do my button programming and assignments.
However, the motorized faders change position on their own in the following situation:
1. I move the faders on the SL (ok, the logic responds and maintains it, in this case there is no problem)
2. I move the logic's virtual fader, the SL responds and follows, two seconds later it changes position
(if I go up in logic, it goes up in SL and then goes down a little... and the other way around too)
3. if I use the knobs to change volume, same thing
First, the SL faders follow the kbob value, after a few seconds, they move to another position.
4. When I change from Track View to global view, or Aux View, for example.
Whenever there is a page change, the faders are positioned in the correct location and a few seconds later, they change position, this also occurs for PAN values, when I am in Flip View.
Anyway, I'm very committed to using the DAW Mode function with Logic, but changing the position of the faders will be impossible.
It seems to me:
1. calibration problem, I'm going to do the calibration procedure that I saw on the internet today to see if it solves it.
2. Some difference between the values of the Logic fader and the SL fader, as the inappropriate change is always different. For example, if I go up 10dB, it goes down 1.5 (I'm making up the values), if I go down 5dB, it goes up 0.75...
I have already installed and uninstalled the control surfaces.
Maybe you can try reinstalling Logic, or reinstalling the SL firmware.
Anyway, can anyone help me?
Thanks