Question

We have a StudioLive Series III 32 channel console paired with a rack Series III 32 channel in stage box mode.

I went to configure a matrix and send the matrix out to the amps, but did not get any signal out. A straight flex mix in aux mode works. Is there some trick to routing a flex mix in matrix mode out the Rack unit in Stagebox mode?

-Doug

Answer 1

When in stagebox mode, the 32R should mirror all the outputs from the console. I just tried it with a matrix and it worked fine. Make sure when you're in UC that the screen shows this message when you click on the Rack mixer:

Answer 2

Make sure your matrix mix channel output is set to ABV send 41-57 to use the pyhsical outputs on rack, depending what output on rack you want to use.