Questions & Answers

Audio not coming out of both speakers using NSB 16.8

+1 vote
1,643 views
asked Jul 21, 2018 in Networked Stage Box by nathanaelcarr (160 points)
I am trying to figure out how to get audio to come out of both speakers using an NSB 16.8. I panning from left to right is not working. I can't figure out what is going on. My set up is standard. I am using a studiolive 16 connecting to the NSB via cat-5e cable and I have the speakers connected to the output channels 1 and 2. I am getting audio from output channel 1 but not 2. Also, I am getting audio when there should be no audio on channel 1 on the sound mixer. The mic I am using a Shure gooseneck mic. In the setting on the sound mixer is are stagebox set up and the output stream is StudioLive 16 AVB send 1-8. Any help would be greatly appreciated.

1 Answer

0 votes
answered Aug 3, 2018 by jonnydoyle (403,640 points)
 
Best answer

NSB Outputs are assigned via the Stagebox menu (UC Settings). There is a drop down menu after selecting the NSB unit. Please ensure you have your streams setup correctly. 

7 streams, 56 channels total.

1: AVB Sends 1-8 = Channels 1-8 = NSB Outputs 1-8

  • Pre-DSP, Pre Fader AVB sends.
  • If you wish the output to be post DSP, then on the change the “Digital Send Option” for the channel to be “Post”

2: AVB Sends 9-16 = Channels 9-16 = NSB Outputs 1-8

  • Pre-DSP, Pre Fader AVB sends.
  • If you wish the output to be post DSP, then on the change the “Digital Send Option” for the channel to be “Post”  

3: AVB Sends 17-24 = Channels 17-24 = NSB Outputs 1-8

  • Pre-DSP, Pre Fader AVB sends.
  • If you wish the output to be post DSP, then on the change the “Digital Send Option” for the channel to be “Post”  

4: AVB Sends 25-32 = Channels 25-32 = NSB Outputs 1-8

  • Pre-DSP, Pre Fader AVB sends.
  • If you wish the output to be post DSP, then on the change the “Digital Send Option” for the channel to be “Post”  

5: AVB Sends 33-40 are broken up as the following

  • 33-34: Aux input 1L, 2R = Pre-DSP, Pre Fader AVB sends.
  • 35-36: Aux input 3L, 4R = Pre-DSP, Pre Fader AVB sends.
  • 37-38: Tape In L, Tape In R = Pre-DSP, Pre Fader AVB sends.
  • 39-40: Main L, Main R= Post Fader/DSP AVB sends
  • If you wish the output to be post DSP, then on the change the “Digital Send Option” for the channel to be “Post”
     

6: AVB Sends 41-48 = Mix 1 to 8 = NSB Outputs 1-8

  • Behaves the same as a normal Aux with Pre/Post and DSP settings

7: AVB Sends 49-56 = Mix 9 to 16 = NSB Outputs 1-8

  • Behaves the same as a normal Aux with Pre/Post and DSP settings
...