I have got into trouble, during critical PA-live situations, when I quickly need to get all my Presonus equipment up and running under a very short period of time. On two occasions I have found that the "Mute All" button on the Stagebox (NSB 16.8) was activated and thereby no sound is coming in/out from the Stegebox. The problem is that the Stagebox preserves its state as it occasionally had when it was powered off. So a power-on, one week later, might start with an All-mute condition if that was the state when the Stagebox was turned off.
I would very much appreciate if you could make a SW fix of this, so that the StageBox always will start in a default "Mute All" = Off when the power is activated. An alternative solution would be to let me, the user, decide on the startup behavior for the "Mute All" switch: 1) Always ON 2) Always OFF 3) Same setting as when the SB was powered off. Such a selection could be made in some "setup menu" from the UC.