Question

The stock Analog, beat and groove delay plugins are unable to configure the delay time of each channel (L/R) separately. For example, it should be possible to make the left channel feedback after every 5ms and the right channel feedback after every 20 ms. However in the stock Studio one plugins, it is only possible to adjust the delay interval of the "overall feedback" of the stereo channel. In pro tools and Logic pro X, They have a Stock delay plugin called Stereo delay which makes it possible to control the delay of output of L and R separately. Otherwise I end up having to duplicate the track, offset it by a few milliseconds and then apply pitch shift which is not feasible to make another track just for the delay effect.

Answer 1

You should be able to do this using the router in the channel editor to set up a channel split which splits stereo signals into pairs of mono signals for independent processing of left and right channel. With two splits, this turns a stereo signal into a pair of left/right mono signals. You can insert a copy of analog delay on both left and right, configure analog delay for mono processing, and get exactly the effect you want.  It took me about a minute to configure my left channel for 5ms and my right channel for 20ms.

Answer 2

Yea am really looking forward to this feature. Stereo Delay plugin is needed in studio one

Answer 3

Great question, and an important feature request for sure.

This would help EDM producers, tune the claps, etc...

Although not the answer you're looking for, a VST that has this feature is: ValhallaDelay.

On the bottom left, turn the STYLE knob to "Dual", which opens up the 2 x options "Delay L" and "Delay R" in the 2nd column.

Finally, Logic Pro seems to have this out-of-the-box, as in the "Simple Delay" below.