You will more than likely want to reach out to the manufacturer of the device for information about modes that the mixer needs to be set to, firmware updates, and OS compatibility. One possible solution would be to use an aggregate device on your Mac and then manually configure the I/O setup inside of Studio One.
Aggregate device setup:
https://support.apple.com/en-us/HT202000
Configure I/O setup in Studio One:
Software I/O Channels
In most recording applications, audio Tracks directly use your hardware audio device’s channels. In Studio One, there is a layer of software I/O (input and output) channels between your hardware audio device channels and your Tracks. This setup affords many advantages over the traditional method.
For instance, let’s say you produce a Song in your studio, using a multi-channel interface, then take your Song file to your friend’s studio, where you use a different audio interface. Simply connect your friend’s hardware audio device channels to the correct software I/O channels. When you get back to your studio, the original I/O configuration for the Song is automatically loaded for you, as if you never left. You can do the same thing if you need to open the Song on your laptop using its built-in audio hardware.
This is possible because Studio One stores I/O configurations with your Song, per computer and per audio device driver, ensuring that your Song remains highly portable and is never “broken” by changing audio devices.
Audio I/O Setup Menu
Each Track in a Song receives a signal from an input source and routes to an output destination. The input sources and output destinations made available to each Track are determined by the software I/O channel configuration created in the Audio I/O Setup menu. To view this menu and set up a default I/O configuration for each Song, create a new Song by clicking on Create New Song in the Start Page and navigate to Song/Song Setup/Audio I/O Setup.
Software I/O Channels
In most recording applications, audio Tracks directly use your hardware audio device’s channels. In Studio One, there is a layer of software I/O (input and output) channels between your hardware audio device channels and your Tracks. This setup affords many advantages over the traditional method.
For instance, let’s say you produce a Song in your studio, using a multi-channel interface, then take your Song file to your friend’s studio, where you use a different audio interface. Simply connect your friend’s hardware audio device channels to the correct software I/O channels. When you get back to your studio, the original I/O configuration for the Song is automatically loaded for you, as if you never left. You can do the same thing if you need to open the Song on your laptop using its built-in audio hardware.
This is possible because Studio One stores I/O configurations with your Song, per computer and per audio device driver, ensuring that your Song remains highly portable and is never “broken” by changing audio devices.
Audio I/O Setup Menu
Each Track in a Song receives a signal from an input source and routes to an output destination. The input sources and output destinations made available to each Track are determined by the software I/O channel configuration created in the Audio I/O Setup menu. To view this menu and set up a default I/O configuration for each Song, create a new Song by clicking on Create New Song in the Start Page and navigate to Song/Song Setup/Audio I/O Setup.