Questions & Answers

closed Fades, automation and more on the project page

+240 votes
asked Oct 30, 2018 in Completed Feature Requests by jimmibranca (390 points)
closed Jan 13, 2022 by Fabian Kiesewetter
Im really confused, when it comes to the project page and adding features. Some requests are from 2016 and there is no adds or fixes. I love the project page and the workflow, but these things are keeping me from working full time in S1 / Project Pages.

Please add clip based volume / plugin automation.

Please PLEASE add multiple curves to the fade section.

Please add the option to separate the plugin, clip and meter windows.

The meters are blue. Please give me the option to change the colours ( green, yellow, red etc. )

An option to normalize clips to a specific selected loudness or based on a selected clip in the session

The ones who use the Sonarworks Reference plugin will be happy for an option to put the plugin after the metering.

Thank You for a great and awesome daw <3
closed with the note: Completed in 5.5.

24 Answers

+21 votes
answered Jan 25, 2021 by Lukas Ruschitzka (256,440 points)
Best answer

Thank you for the feature request. 

If anyone else agrees or disagrees, please VOTE!

The developers pay close attention to those that are voted on the most. 

You are allowed one vote. You can change your vote later if you choose.

(Here's some helpful info on how to use the voting system)

Please vote the original question / feature request. 

Please DO NOT Vote on THIS response!

+34 votes
answered Nov 24, 2018 by andrefreitag1 (2,070 points)
+1 for automation and outboard routing pls!
+18 votes
answered Jan 13, 2019 by jameslawrence (2,510 points)
Yes PLEASE PreSonus!
+12 votes
answered Sep 3, 2019 by chrismarshall2 (1,100 points)
+1 on the Sonarworks request there to be post metering.
+27 votes
answered Dec 6, 2019 by wernerhagen (540 points)

Automation for Project page. If I only master songs not generated in S1 I can not do critical volume changes in mastering file. Also clip gain like in protools with showing waveform changes immediately after edit. 

Yes PLEASE PreSonus!

+31 votes
answered Feb 3, 2020 by philippburgmer (560 points)
Would be great to have automation in project page.

And as far as I can see it's the most requested feature for mastering at the moment.
+6 votes
answered Jul 10, 2020 by adrianwhalland (260 points)
Has automation been added in V5?
+14 votes
answered Jul 21, 2020 by tomslowcat (3,620 points)
And this is still not available in V5... Dear Presonus, adding new modes like the Show page is nice, but you've got to focus more on improving what's already in there! We don't want Studio One to become a Jack of all trades, master of none, do we?
+16 votes
answered Jul 21, 2020 by benreaves (11,280 points)

This is a collection of seriously good suggestions for fixing the Project page. As it stands even in version 5, the Project page is useless if you use Sonarworks, and extremely limited in terms of mastering because of the lack of automation.

The Project page must include automation and support for the Listen Bus at the bare minimum. Preferably the Listen Bus concept could be expanded to something more like my "Control Room" FR that still hasn't been addressed (, but at the very least the Project page needs automation and the Listen Bus. Take this FR under consideration, please.

+15 votes
answered Jul 24, 2020 by adarshchandran (5,420 points)
edited Oct 23, 2020 by adarshchandran
Please presonus.... Include automation and GAIN ENVLOPE in project page in upcoming updates please!!!
+7 votes
answered Dec 2, 2020 by henriquewuensch (360 points)
+ Listen bus on the project page too!
+10 votes
answered Jan 25, 2021 by davidcarlyon (550 points)
I am here in 2021 saying the same thing - the project page NEEDS Automation! Studio One is ALMOST an all in one solution, but it is difficult to imagine using this for serious mastering projects in the state it is in.

My worry with studio one is - it has a great breadth of tools and is probably the best all rounder, but many of the features, add ons, plugins etc are very basic and geared towards hobbyists/beginners.

When you look at the cubase solution to the listen bus - control room (with all those amazing analysers they have added...including up to date loudness metering)

My point is, it is a PRO solution. Not a 'rough and ready, get the job done' type solution.

That said, Wavelab doesn't have automation either which is annoying - otherwise that is the combo I would think about switching to.

So far, if I want an all in one solution for mixing and mastering, Reaper is the only real choice with its 'sub projects'

There I can import a mix, or indeed, I can 'sub project' all of my main group busses and master from stems - with full automation on channels, master, clips (including plugin automation)
+10 votes
answered Jan 27, 2021 by klausnyberg (1,810 points)
So true. The project page could easily be upgraded from sometimes usefull to EPIC.
+7 votes
answered Feb 4, 2021 by michaelgreen2 (450 points)
Please add automation to Projects, mastering should not be limited to flat volume changes.
+4 votes
answered Feb 10, 2021 by Lokeyfly (1,720 points)
I'd like to see standard automation lanes/controls such as volume automation, pan automation (for subtle pan fixes). Last but not least, add the control link so that any parameters from mastering effects could be adjusted if and where needed. How sweet!
Thank You Presonus for the amazing Project page in Studio One (since it's inception). Now let's add some very useful automation control.
+1 vote
answered Feb 11, 2021 by Skaperverket (4,700 points)
Great feature request. I agree with all points. I especially hope automation and more fade curves will be added. The latter for the regular part of Studio One as well.

Pyramix has a fade editor with some interesting solutions. If PreSonus Hamburg could take some inspiration from the handles it uses to manipulate the curves, that would be great. Have a look at this video (skip to 0:50):

At least I hope for an S-shaped curve. Very often I find myself missing that when mixing, as it often sounds more natural and pleasing.
+3 votes
answered Feb 11, 2021 by billsaunders1 (510 points)
The project page is almost awesome - great concept but actually of limited value to anyone doing mastering semi-seriously because of the lack of automation.
+5 votes
answered Mar 2, 2021 by alexleonard2 (1,740 points)
+100 This is absolutely necessary and is often the reason I end up mastering in Song mode instead of Project mode. Granted I don't do a huge amount of automation when I'm mastering but there are plenty of times where it's absolutely necessary. Really hope this gets added soon.
+5 votes
answered Apr 13, 2021 by johnboyd4 (240 points)
Yes PLEASE, We need automation. Automation is very important in mastering.
+4 votes
answered Jul 31, 2021 by chrisanson (260 points)

the project page NEEDS Automation!

+1 vote
answered Oct 15, 2021 by dannyburke2 (500 points)
Yep.. Presonus, you have the perfect transfer solution for sending mixes to mastering in the project page.. please, please implement these changes so that we can actually master in Studio One. Automation is a must.. not just fader, but inserts as well and the listen buss is a must.
+1 vote
answered Oct 20, 2021 by jaimeramirez4 (500 points)
Please Presonus Automation in project page
+1 vote
answered Nov 28, 2021 by stefanleibing (170 points)
Automation on the project page would add a lot of value to Studio One to my opinion! Sometimes it is neccessary to make the chorus of a song a tiny little bit louder to make a special EQ move in a song part. Thanks for having developed such a great software!
+1 vote
answered Jan 9, 2022 by jvccz (190 points)
It is 2022 and still no automation on project page.