Questions & Answers

How to make a Monitormix through a SL III/16R in stagebox-mode and using a SLIII/16 as a DAW-control

0 votes
493 views
asked Aug 13, 2019 in StudioLive Series III by joseftunhardt (350 points)
HI, my configuration is:

- SLIII/16-console in the controlroom as DAW-control and Input for Studio 1 V4.5 via USB

- SLIII/16R in the recording-room in stagebox-mode as input and monitor-out

How do I have to configure the I/O to get the main-out and at least 2 monitor-mixes out of the SLIII/16R?

(I already got the main-mix out of the SLIII/16R).

Thanks!

1 Answer

+1 vote
answered Aug 13, 2019 by wahlerstudios (105,310 points)
selected Aug 16, 2019 by jonnydoyle
 
Best answer
This is actually quite easy, because you can use Stagebox Mode and do all mixing on the console. When both mixers are connected via AVB, go to "Audio Routing" on the touchscreen of your console and then "Stagebox Setup". The rack mixer should be listed there already. For Preamp Permission select "StudioLive 16" and as Mode select "Stagebox". "Apply" the setting - and that's it...! Now the 16R is working as stagebox and all mixes are made on the SL 16. A nice feature is that you can use the 2+6 outputs of your mixer simultaneously.

It may be helpful to reset project/scene and networking routing of the rack mixer first, because Stagebox Mode is a network preset, which works best when mixers are "fresh". I always recommend to read the "StudioLive_Series_III_Stagebox_Mode_Addendum_V5_EN_25032019", which you find in the download area of your mixers.

On the console you can toggle between DAW and normal mode. You don't need to do the monitor mixes on the rack mixer.
...