Is there any capability or plan to enable automation of input and buss level controls in Universal Control for StudioLive (rack) mixers?
Essentially similar to that of the dbx driverack units, but not requiring patching through external box nor limited to a few channels.
Something like setting up all inputs, and outputs, and running a "script" that would run a band limited (pink) noise chirp or reference signal that tested for feedback and perceptible delays.
It would then adjust input gains and GEQ notch the Aux mixes sequentially and then in combination against all (aux/matrix/main) outputs to ring out venue feedback.
Delays could be measured and auto-adjusted as needed between backline sources and frontline speakers to improve stage & FOH coherence.
A designated Input channel could be used with an RTA mic, individual channels/busses could be enabled/blocked for this purpose.
I'd cheerfully buy this as a $99 add-on to Universal control for MacOS and separately for IPadOs