Question

I have exported an AAF file with 54 tracks from Samplitude and opened it in StudioOne 4.5.  The track assignment and the individual waveforms of the 54 WAV files are displayed correctly.  But how do I configure StudioOne so that I can individually control the tracks in DAW mode on the StudioLive 32SX, and  edit in EQ or Fat Channel.  What should I do with input / output routing in the song settings?  There is a network connection and I can control StudioOne via the mixer.

Answer 1

Please review the DAW mode setup guide for Studio One. 

Studio One Video: https://www.youtube.com/watch/?v=zxfl9j7LdfM

Studio One Guide: https://pae-web.presonusmusic.com/downloads/products/pdf/StudioLive_Series_III_Studio_One_DAW_Control_Addendum_EN_V3_25032019.pdf

Answer 2

I left the answer to "Mr. Support", because I haven't checked how to handle 54 tracks in DAW mode. But what I remember from my CS18AI days is that it can handle more tracks than the physical banks of faders. This is basically the same for the Sereis III mixers and their adaption of DAW mode, but I don't know if they can go beyond the 64 USB streams. Mr. Support said to this question: "The mixer should display 54ch of audio/faders as long as he has set up DAW mode correctly. He needs to just review the setup guide." You find the links in his answer.

Answer 3

I had already seen and read the video and the manual.My question is unfortunately not answered.In DAW mode, I get only 32 channels on the StudioLive 32SX mixer plus A1, A2, FX, and Tape.Since the desk should have an internal 64x64 recording unit, I expect to see the maximum number of my project tracks. Of course, the physical inputs are limited to 32. But I mix an already recorded 54 track project. Internally, the console should be able to represent and process this number of channels.In the song settings of StudioOne I have configured the inputs and outputs. Here I can easily create up to 64 channels on the input and output side.But if I switch the console to DAW mode only a maximum of 32 channels will appear. Is there a trick that you need to know that is not revealed in the manuals and videos?

Answer 4

Would it be an idea to use the "Next" button...?