I had already seen and read the video and the manual.My question is unfortunately not answered.In DAW mode, I get only 32 channels on the StudioLive 32SX mixer plus A1, A2, FX, and Tape.Since the desk should have an internal 64x64 recording unit, I expect to see the maximum number of my project tracks. Of course, the physical inputs are limited to 32. But I mix an already recorded 54 track project. Internally, the console should be able to represent and process this number of channels.In the song settings of StudioOne I have configured the inputs and outputs. Here I can easily create up to 64 channels on the input and output side.But if I switch the console to DAW mode only a maximum of 32 channels will appear. Is there a trick that you need to know that is not revealed in the manuals and videos?