Question

When I am mixing a track and press play I am able to listen to the track out my speakers just fine but when I send the same track to the project page and press play it shows that the track is playing but I get no sound. I did the latest upgrade restarted the whole system and still nothing I am so lost at this point...

Answer 1

What steps are you following to "send the track to the project page"?

Right-click, then open exported file or Right-click and open the multi-track project or ?

Answer 2

I first open S1 click on the recent track I am working on then when in the mix down page I then click up top on "song" the go to "add to project" follow the steps from there. It renders fine then follows up to the project page as it should but when I press play. Still no sound. I go back to the mix page and press play and all works fine and I get sound immediately

Answer 3

I guess I follow a different work flow.  I create a new Project and add a reference to my Song (the Song's project, not an exported WAV) to the Project.

It will then look to see if there is a Master mix and if not, create one based upon your Start and End markers.

If by chance you have your Start and End markers somewhere in the timeline that does not have anything going on you'd have silence.

Answer 4

You may have figured it out by now, but the answer to this is the it hasn’t recognized your stereo output. When in the project page, go to the top menu bar, click on “project”, go down to “project setup”, then make sure you are on outputs and change to wherever you have your Main L/R assigned. In my case channels 37/38 are my assigned Main L/R outputs.