Question

I want to use my Studiolive 16 Series 3 mixer as a USB interface. I also want to use Studio One for my DAW. I figured out how to get my Main L+R output to work by selecting the Tape L+R (37+38) but how do I use my Mix Outputs so I can modify what the musician wants to hear while I can hear something else in the mixer booth. I want to be able to create another output and be able to provide with the click for example.

Thanks in advance.

Luc

Answer 1

Go into the audio setup for the song and click on the little check box that says "cue". Then you rout things from the mixer in S1. There is a much better description of it in the manual. But it is a very elegant solution. You still have to setup your routing but it is all there. You can also always run UC Control on a second computer or tablet and use it as a dedicated aux controller if you wanted.

Answer 2

Hi Luc,

could you please post a printscreen of your setup in StudioOne? I am also strugglig the same issue. I want to record the whole band and replicate the aux setup we´re using in UC but with no luck.
I don´t get to hear anything from any output of my StudioLive. Also, I am unable to route click to any aux or main L+R.