Like a similar reported incident, I'm getting "The firmware update failed with error code 2010" on Windows 10 and can't get past it. Unlike the issues I've read about earlier, this unit is right out of the box and is failing the first time I tried anything. I've rebooted, turned the Studio unit off/on, restarted UC (closing service entirely then restarting), rebooted with it off, rebooted with it on, in short, all the possible permutations I could think of to no effect. Issue remains after multiple restarts of all of UC, Studio 192 and Windows 10 itself.
I actually see the firmware update start to download for about .5 seconds and see the download progress bar going up before it gives the error. The Studio 192 unit has "E 05" in its display.
System specifics:
No-name box using AMD 8350 8-core processor onan ASRock motherboard, 16 GB RAM, Windows 10 Pro, USB 3.0 wireless adapter on one of two pairs of USB 3 ports on back with Studio 192 plugged into a different pair in case there was a USB3 collision issue or something.
Firmware levels: Installed: DSP v1.1-75, New: DSP v1.2-22
UC AI level 1.4.3.35573.
Let me know if I omitted anything important.. ;-)
